Stay comfortable with HeaterCraft’s complete system that includes everything you need to install this marine heater in your boat. Choose the two vent (200 Series) or three vent (300 Series). This system will work great for wakeboard boats but will also work on any boat with an inboard engine including houseboats, cruisers, yachts, and more.

The best marine heater in the industry has been fully optimized to produce a comfortable environment within the cabin of your boat. The engineering team at Heater Craft went back to the drawing board and totally redesigned their marine heater line. The result is a more efficient compact design. Experience an 8% increase in air flow while the overall unit has seen a 3% reduction in weight and is 5% smaller in it’s form factor. Whether you are looking to warm up after an early morning run or stay comfortable later into the season, the Heater Craft marine heater is the best product on the market.

Heater Craft has been the standard of excellence in marine heaters since they began over 25 years ago. They are the OEM marine heater for many of the top boat brands including Axis, Bayliner, Centurion, Cobalt, Malibu, MB Sports, Nautique, Master Craft, MB Sports, Sea Ray, Supra, Supreme, and numerous other brands.

Heater Craft believes in building the highest quality marine accessories which is why they back the product with their 4/48 limited warranty — 4 years, 48 months.

Circulation Pump Upgrade Option:

Typically the heater unit is mounted in a location not in close proximity to the boat’s engine.A common example would be under the driver’s helm or in the observers compartment. When the boat is idling or moving at low RPM’s there may not be enough water circulation in the system which will produce a decrease in hot air output. The circulation pump will efficiently move hot water from the engine to the heater’s coil which in turn will help the system produce warm air through all outputs. This upgrade is very nice for those that want to use the heater while they are getting ready or after finishing up their session on the water.

Outlet Options:

The two vent system will come with one 1st Generation Hot Tube which is an extendable heater hose and one fixed louver vent that can be directed toward a passenger close to the unit. A popular upgrade is to utilize both vents on the system with two 1st Generation Hot Tubes allowing for a more convenient way for passengers to stay warm where ever they may be sitting in the boat. The three outlet system will come with two 1st Generation Hot Tubes and one fixed louver vent. This system can also be upgraded with all three vents being used to accommodate extendable 1st Generation Hot Tubes.

Technical Specifications:

• Measured Output: 2 Vent (200 Series) 28,000 BTU Heater / 3 Vent (300 Series) 40,000 BTU Heater
• Amperage: 4.4 to 8.5 amps
• Air Flow: Low 230 cfm, Med 228 cfm, High 263 cfm
• Hose barb: 5/8″ or 3/4″
• Dimensions: 2 Vent (200 Series) 9.4W x 6.4H x 8.6D / 3 Vent (300 Series) 16W x 6.5H x 9.5D

What’s Included:

• Universal Mounting Brackets & Screws
• Heavy Duty Wire Ties
• Wire harness
• One(1) High Low Switch with Indicator Assembly
• Six(6) Stainless Steel Hose Clamps
• Two(2) 6′ Sixteen Gauge Wire
• 50 Feet of Heater Hose
• Brass Fittings
• One(1) Single Throw Harness
• Detailed Installation Manual